Results 1 to 3 of 3

Thread: Can not increase the dwell time to more than 10s.

  1. Default Can not increase the dwell time to more than 10s.

    In our current version (AR15.09.112), we can not increase our dwell time to more than 10s. The manualette shows we should see "dwell rate" (please see below), check the "Use box" and increase the dwell time, but we never see this "dwell rate" option in our software.

    Attached Thumbnails Attached Thumbnails Click image for larger version. 

Name:	1.png 
Views:	24 
Size:	36.6 KB 
ID:	2473  

  2. Default

    I don't think it is visible by default. If you go to the setup at the bottom of the force:misc tab then you should be able to see it.

    Hope this helps,
    Tim

  3. #3
    Join Date
    Feb 2005
    Posts
    1,055

    Default

    If you click on the 'programming' menu item you can navigate to Programming-->Global Variables-->Force

    find 'dwell time' and increase the maximum above 10s. This will temporarily raise the limit. When the software starts over it will reset to 10.

    K
    _______________

    Keith Jones
    AsylumResearch
    _______________

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •