Announcement

Collapse
No announcement yet.

The Asylum Research SPM Software

Collapse
X
Collapse
  •  

  • The Asylum Research SPM Software

    This section of the support site is dedicated to frequently asked questions about the Asylum Research SPM Software.

    Also consider visiting the SPM Software Forum where you can discuss issues with other users (including Asylum Research Employees).

    In general the FAQ contains basic information that has been edited by Asylum Research. The Forum contains mostly discussions between instrument users.

    Note: Only a limited number of Frequently Asked Questions are accessible if you are not logged in. To gain full access, please log in (which means at some point you must register).
      Posting comments is disabled.

    article_tags

    Collapse

    Latest Articles

    Collapse

    • Software version compatability
      by Bemis
      There is an issue with the XYZ gains and older versions of the software.
      If you go to version 12 or above, then your system will be using the new gain system. Once you go to the new gains, your instrument should not use versions < 101010.

      If you want to continue using 101010, you need to make sure it is >= 101010+4706
      http://downloads.asylumresearch.com/...01010+4706.zip If you want to continue using 111111, you need to make sure it is > 1126 ...
      2015-05-08, 01:14 PM
    • Building a New real time computer
      by Bemis
      Current recommended system:

      Dell Precision T3500 Workstations
      Intel QuadCore Xeon 3500 series (2.80GHz)
      6GB DDR3 RAM
      2 320GB SATA Hard Drives (RAID1 mirror)
      2012-05-24, 11:14 AM
    • How to install Asylum USB Drivers
      by Bemis
      There are currently 2 versions of the USB drivers, we will refer to them as old and new. The version of the MFP3D software you want will determine if you need old or new drivers.

      MFP3D Version Old Drivers New Drivers
      ...
      2011-06-28, 10:02 AM
    • How to write code to click on buttons
      by Bemis
      One of the easiest ways to get started writing Igor code is to write something that simply clicks on Asylum buttons in a certain order. Here is how to get started with that. 1) Bring up the panel that has the button you want to click on. 2) Hit Ctrl + T to bring up the tools for the panel. 3) Click on the second button on the left that now shows. 4) Double Click on the button you want to use. 5) For buttons there are 2 things you need to get from this dialog. The Control name (First ...
      2011-02-02, 08:39 AM
    • Running Copies of the Igor Pro / AR Software
      by Bemis
      There are typically two main reasons to make a copy of the Igor Pro / AR Software, and they are slightly different.
      1. You want to try out some new MFP3D code. There is a new feature that is in the unstable code that you want to try out, but it is the new code. There are going to be bugs, and so you want to be able to go back quickly, and you don't want other people in the lab to have to deal with the new bugs. This is by far the most common reason, and the easier way to make a Igor
      ...
      2010-03-17, 03:11 AM
    • Reporting Bugs
      by ARadmin
      Send bug reports to [email protected], but to help us resolve it quickly, please read on and learn how to compose a useful report for us to work from.

      Composing your Bug Report

      Effective bug reports are the most likely to be fixed. These guidelines explain how to write such reports.
      Principles

      • Be precise
      • Be clear - explain it so others can reproduce the bug
      • One bug per report
      • No bug is too trivial to report - small bugs may hide big
      ...
      2010-03-17, 01:51 AM
    Working...
    X